299 phl-4tsi www.vishay.com vishay bccomponents revision: 18-nov-16 1 document number: 28432 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum electrolytic capacitors power high ripple current long life 4-terminal snap-in fig. 1 features ? polarized aluminum electrolytic capacitors, non-solid electrolyte ? large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve ? pressure relief on the side of the aluminum case ? very long useful life: 5000 h at 105 c ? temperature range up to 105 c ? stable mounting and keyed polarity ? high ripple current capability ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? switched mode power supplies ? renewable energy power converters ? energy storage in pulse systems marking the capacitors are marked (where possible) with the following information: ? rated capacitance (in f) ? tolerance code on rated capacitance, code letter in accordance with iec 60062 (m for 20 %) ? rated voltage (in v) ? date code ? name of manufacturer ? code for factory of origin ? - sign to identify the nega tive terminal, visible from the top and side of the capacitor ? (partial) ordering code ? climatic category in accordance with iec 60068 quick reference data description value nominal case size (d x l in mm) 35 x 50 to 45 x 100 rated capacitance range c r 470 f to 2200 f tolerance on c r 20 % rated voltage range, u r 400 v to 450 v category temperature range -40 c to +105 c endurance test at 105 c 2000 h useful life at 105 c 5000 h shelf life at 0 v, 105 c 1000 h based on sectional specifi cation iec 60384-4 / en 130300 climatic category iec 60068 40 / 105 / 56 299 phl-4tsi 105 c 096 pll-4tsi selection chart for c r , u r , and relevant nominal case sizes (? d x l in mm) c r (f) u r (v) 400 450 470 - 35 x 50 40 x 40 560 35 x 50 35 x 60 40 x 50 680 40 x 40 35 x 70 820 35 x 60 35 x 80 40 x 50 40 x 60 1000 35 x 70 35 x 100 40 x 80 45 x 60 1200 35 x 80 45 x 70 40 x 70 45 x 60 1500 35 x 100 40 x 100 45 x 70 45 x 80 1800 40 x 100 45 x 100 45 x 80 2200 45 x 100 -
299 phl-4tsi www.vishay.com vishay bccomponents revision: 18-nov-16 2 document number: 28432 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and available forms 4-terminal snap-in fig. 2 - 4-terminal snap-in fig. 3 - mounting hole diagram dummy terminals (a and c) must be free from the el ectrical circuit. table 1 note ? unless otherwise specified, all electrical values in table 2 apply at t amb = 20 c, p = 86 kpa to 106 kpa, rh = 45 % to 75 % ordering example electrolytic capacitor 299 series 2200 f / 400 v 4-terminal snap-in: ordering code: mal2 299 56222 e3 ? former 12nc: 2222 299 56222 22.5 ? d bottom view l max. 6.3 1 60 60 d u mmy d u mmy c b a 2 0.1 (4 x) 22.5 0.1 60 60 dimensions in millimeters, mass and packaging quantities nominal case size ? d x l ? d max. l max. mass (g) packaging quantities (units per box) cardboard box dimensions l x w x h 35 x 50 36 52 72 50 390 x 198 x 60 35 x 60 36 62 91 50 390 x 198 x 70 35 x 70 36 72 103 50 377 x 375 x 97 35 x 80 36 82 115 50 377 x 375 x 107 35 x 100 36 102 151 50 377 x 375 x 127 40 x 40 41 42 70 50 440 x 223 x 60 40 x 50 41 52 94 50 440 x 223 x 70 40 x 60 41 62 118 25 230 x 230 x 80 40 x 70 41 72 134 25 230 x 230 x 90 40 x 80 41 82 150 25 230 x 230 x 100 40 x 100 41 102 176 25 230 x 230 x 120 45 x 60 46 62 150 36 377 x 375 x 87 45 x 70 46 72 170 36 377 x 375 x 97 45 x 80 46 82 190 36 377 x 375 x 107 45 x 100 46 102 250 36 377 x 375 x 127 electrical data symbol description c r rated capacitance at 100 hz i r rated rms ripple current at 100 hz and 105 c i l5 max. leakage current after 5 min at u r esr max. equivalent series resistance at 100 hz z max. impedance at 10 khz
299 phl-4tsi www.vishay.com vishay bccomponents revision: 18-nov-16 3 document number: 28432 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 2 electrical data and ordering information u r (v) c r (f) nominal case size ? d x l (mm) i r 100 hz 105 c (a) i l5 5 min (ma) typ. esr 100 hz (m ? ) max. esr 100 hz (m ? ) typ. z 10 khz (m ? ) max. z 10 khz (m ? ) catalog number mal2299....... 400 560 35 x 50 2.70 0.452 170 220 130 160 56561e3 680 40 x 40 2.79 0.548 150 190 110 140 56681e3 820 35 x 60 3.44 0.660 120 150 90 110 56821e3 820 40 x 50 3.51 0.660 120 160 90 110 66821e3 1000 35 x 70 3.88 0.804 100 130 70 90 56102e3 1200 35 x 80 4.34 0.964 90 110 60 80 56122e3 1200 40 x 70 4.50 0.964 90 110 60 80 66122e3 1200 45 x 60 4.61 0.964 90 110 60 80 76122e3 1500 35 x 100 5.54 1.204 70 90 50 60 56152e3 1500 45 x 70 5.20 1.204 70 90 60 70 66152e3 1800 40 x 100 6.02 1.444 50 70 40 50 56182e3 1800 45 x 80 5.74 1.444 60 80 50 60 66182e3 2200 45 x 100 6.77 1.764 50 60 40 50 56222e3 450 470 35 x 50 2.54 0.427 190 240 130 160 57471e3 470 40 x 40 2.45 0.427 190 240 140 170 67471e3 560 35 x 60 2.96 0.508 160 200 100 130 57561e3 560 40 x 50 3.05 0.508 160 200 110 140 67561e3 680 35 x 70 3.34 0.616 120 160 90 110 57681e3 820 35 x 80 3.76 0.742 110 140 70 90 57821e3 820 40 x 60 3.73 0.742 110 140 80 100 67821e3 1000 35 x 100 4.74 0.904 90 110 60 80 57102e3 1000 40 x 80 4.41 0.904 90 110 60 80 67102e3 1000 45 x 60 4.34 0.904 90 120 60 80 77102e3 1200 45 x 70 4.84 1.084 80 100 60 70 57122e3 1500 40 x 100 5.67 1.354 60 80 40 50 57152e3 1500 45 x 80 5.39 1.354 60 80 50 60 67152e3 1800 45 x 100 6.36 1.624 50 70 40 50 57182e3 additional electrical data parameter conditions value voltage surge voltage ? 400 v versions u s = 1.1 x u r reverse voltage u rev ? 1 v current leakage current after 1 min at u r i l1 ? 0.006 c r x u r + 4 a after 5 min at u r i l5 ? 0.002 c r x u r + 4 a inductance equivalent series inductance (esl) all case sizes ca. 20 nh
299 phl-4tsi www.vishay.com vishay bccomponents revision: 18-nov-16 4 document number: 28432 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ripple current and useful life table 3 note ? multiplier of useful life code: ccc206-5 fig. 4 - multiplier of useful life as a function of ambient temperature and ripple current load table 4 endurance test duration and useful life endurance at 105 c (h) useful life at 105 c (h) 2000 5000 multiplier of ripple current (i r ) as a function of frequency frequency (hz) 50 100 200 400 1000 10 000 i r multiplier 0.9 1.0 1.2 1.3 1.4 1.5 i a = actual ripple current at 100 hz i r = actual ripple current at 100 hz and 105 c (1) u s eful life at 105 c and i r applied: 5000 h lifetime multiplier 40 0.0 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 i a i r 3.8 ccc206-5 50 200 100 70 50 30 20 10 6.0 4.0 3.0 2.0 1.5 1.0 60 70 80 90 100 110 (1) t amb (c)
299 phl-4tsi www.vishay.com vishay bccomponents revision: 18-nov-16 5 document number: 28432 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 5 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? statements about product lifetime are based on calculations and in ternal testing. they should only be interpreted as estimation s. also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. in general, nothing stated herein shall be construe d as a guarantee of durability. test procedures and requirements test procedure (quick reference) requirements name of test reference endurance iec 60384-4 / ? en130300 ? subclause 4.13 t amb = 105 c; u r applied ? 2000 h ? c/c: 10 % esr ? 1.3 x spec. limit z ? 2 x spec. limit i l5 ? spec. limit useful life cecc 30301 ? subclause 4.13 t amb = 105 c; u r and i r applied; ? 5000 h ? c/c: 30 % esr ? 3 x spec. limit z ? 3 x spec. limit i l5 ? spec. limit no short or open circuit, ? no visible damage ? total failure percentage: ? 3 % shelf life iec 60384-4 / ? en130300 ? subclause 4.17 t amb = 105 c; no voltage applied; ? 1000 h ? ? after test: u r to be applied for 30 min ? 24 h to 48 h befo re measurement ? c/c: 10 % ? esr ? 1.2 x spec. limit ? i l5 ? 2 x spec. limit
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
